2026

[FIX, Integration Suite] Fixed deployment to Integration Suite systems with an Edge Integration Cell runtime: an IFlow whose runtime profile points to the Edge runtime was deployed to Cloud Integration instead. The runtime is now taken from the IFlow’s runtime profile on the tenant everywhere Figaf Tool deploys an IFlow: Deploy on the Landscape Overview page (the Runtime selection in the dialog still applies to non-IFlow artifacts only), transports with Deploy after transport, distribution configurations with Deploy uploaded objects, restore with Deploy restored objects (the restored IFlow also gets its last stored configuration back), test IFlows of the Testing Tool (Delete test IFlows now undeploys on Cloud Integration and on every Edge runtime of the agent) and PI to CPI migration with an Edge Runtime Profile and Try to deploy after migration. Agents without an Edge Integration Cell runtime and IFlows running on Cloud Integration behave as before.

[PI→CPI Migration] Added support for ICOs with a wildcard (*) sender to PI to CPI migration. See Wildcard ICO migration.

[PI→CPI Migration] Added support for ICOs with a wildcard (*) receiver (receiver channels defined in Receiver Agreements) to PI to CPI migration. See Wildcard ICO migration.

[FIX, PI→CPI Migration] Fixed PI to CPI migration of an ICO with an interface split where several receiver interfaces use the same File receiver channel with content conversion in Figaf Converter mode.

[FIX, DevOps] Fixed the calculation of the next ticket and transport number when the Ticket prefix or Transport prefix configured for a landscape starts with the standard prefix (for example, TRANSPORT-QA next to the standard TRANSPORT). IDs created with the longer prefix (such as TRANSPORT-QA-1) were counted for the standard prefix as well, so ticket creation and Start Transports could fail.

[DevOps] Improved batch Resolve and Cancel of tickets on the Tickets page. All selected tickets that can be resolved are resolved right away. For the others you can choose per ticket what to do (move to development, cancel or skip). Tickets whose transports were imported in one batch are still resolved all together or none. Resolving from a single ticket page is unchanged.

[Change Management, DevOps] Archived landscapes are no longer offered wherever a landscape is picked: Landscape Overview (including the Landscape Overview actions on Tickets, Object Info and B2B Scenarios), Migration to IS, the Home page landscape block and the landscape selection of the Change Log (Show versions across landscape). See Archive a landscape.

[Infrastructure, Security] Added support for Microsoft Entra authentication to Azure Database for PostgreSQL flexible server (first delivered in patch 2606.4; not included in 2608). Figaf Tool can log in with a Microsoft Entra access token instead of a database password, so no database credential has to be stored in the deployment - access is granted to an Azure identity (user-assigned or system-assigned managed identity, AKS workload identity or service principal) and revoked centrally in Entra ID. The mode is optional and off by default, so existing password-based deployments and other database systems aren’t affected. See the section for the configuration steps.

[PI→CPI Migration] Improved the migration of File sender channels with content conversion (Figaf Converter mode, see File Content Conversion migration) to follow SAP PI behavior more closely. The channel’s Key Field Name is now respected, so files whose key field is not the first field of the line are converted correctly. Enclosure signs (quoted CSV values), fieldContentFormatting, missingLastFields, additionalLastFields and ignoreRecordsetName are now read from the channel and reach the generated script. Lines that match no record type and blank lines are skipped with a warning instead of failing the conversion, and the generated script is always valid Groovy even when channel values contain quotes. The migration log now warns about File Content Conversion options that the Figaf converter doesn’t support, so a mismatch is visible before the IFlow runs.

[B2B] Added an endpoint value to the Manage Communications dialog of trading and communication partners, companies and subsidiaries, so it’s visible where each communication points without opening it in TPM. Values are shown exactly as configured: the Recipient URL of an AS2 receiver, the Address of a Process_Direct, IDOC, SOAP_1.x or SAP RM receiver, and the Address and Directory of an SFTP sender or receiver. All other senders and the system rows stay empty.

[FIX, PI→CPI Migration] Fixed the content conversion script generated for File sender channels producing broken XML (every field cut to its first character) when the field separator is a regular expression character such as |. Separators are now always treated as literal text.

[FIX, Change Management, B2B] Fixed agreement synchronization of Integration Suite agents failing with error Attribute name "…​" associated with an element type "…​" must be followed by the ' = ' character when a B2B scenario has a parameter name that isn’t a valid XML name (for example, a name with a space, a slash, a colon or a leading digit). Such names are stored in an encoded form in the B2B Scenario payload (new para becomes new_x0020_para); nothing changes in SAP, transports and agreement creation still send the original names. Agreements already stuck with this error are repaired by the first synchronization after the update, which reports the affected B2B scenario as changed once.

[FIX, DevOps, B2B] Fixed transported AS2 security configurations that couldn’t be activated in the target tenant (activation failed with Cannot read resource with ID …​ Not Found from Configurations service). This affected the AS2 Inbound Decryption Configurations of a company or subsidiary, and the Signature Verification Configurations of trading and communication partners whose Alias differs from the AS2 Partner ID. Such entries are now transported under the identifier SAP uses to find them, so the entry of the target’s purpose can be activated in TPM. Entries already transported by an earlier version must be deleted in the target tenant - see Transported security configuration can’t be activated.

[FIX, Testing Tool] Fixed handling of deleted integration objects in the Testing Tool. Deleted objects are no longer resolved as test objects automatically during test case creation (including B2B test cases created from an archive), can’t be linked to or assigned to test cases manually or through the public API, and test cases aren’t run on them anymore - such objects are skipped with a warning listing them, while the remaining test objects and test cases still run.

[FIX, Testing Tool, PRO] Fixed the Add modules operation on the Integration Objects page failing with an error when the Use the most appropriate messages logging approach by default per scenario option is enabled and the selected object uses ICO Logging (no modules required). Such objects are now skipped.

[B2B] Enhanced Subsidiary creation with per-system (Dev/Test/Prod) security details and automatically generated, uniquely named communication user accounts and security entries.

[B2B] Added a Uses Communication Partner option to Trading Partner creation. When enabled, only the partner profile basics and identifiers are created — no systems and no communications.

[B2B] Allowed free-text Type System Versions when creating Subsidiaries and Trading Partners. For type systems that support it (SAP IDoc, SAP S/4HANA Cloud/On-Premise SOAP, Custom Messages) a version such as 750 can be typed in.

[B2B] Enhanced B2B Scenarios overview: the Activated indicator now reflects whether any agreement version is active (not only the latest), and the B2B Scenario/Agreement links now open the active version by default (with the option to open either the active or the latest version).

[DevOps, B2B] Changed the B2B import for Locked Version landscapes so B2B objects (the TPM archive) are imported only after the rest of the transport is clean. If any other object of the transport has an unresolved validation exception or error, the B2B import is skipped with an explanatory message and runs on the next attempt once the problems are resolved or suppressed. This prevents the TPM archive from being imported twice and avoids a half-deployed state on the target.

[DevOps, B2B] Improved the B2B transport error shown when an Agreement or Agreement Template references a MIG/MAG that no longer exists on the Integration Suite (usually deleted). The notification now lists every affected object together with the missing MIG/MAG id, so it’s clear which objects must be updated before retrying.

[DevOps, B2B] Made Mapping Guideline (MAG) a licensed object. A MAG now requires its own object license to be used in DevOps and can be licensed in advance from Config → License → Add Object Licenses. A Message Implementation Guideline (MIG) needs no license.

[DevOps] Added a Show only pending option to the DevOps Tickets and Transports tables that hides items in a final state (transports: IMPORTED, REVERTED, CANCELED, DECLINED; tickets: COMPLETED, MIGRATED, CANCELED). The filter runs on the server and the choice is remembered per browser.

[Change Management, DevOps] Added a DevOps ticket filter to the Landscape Overview so tracked objects can be filtered by one or more DevOps tickets.

[Change Management] Added a Landscape Overview action to tracked objects that opens the Landscape Overview for the object’s composite landscape, filtered to that object. The action is hidden for object types not shown on the Landscape Overview.

[Change Management, B2B] Added a Landscape Overview button to the B2B Scenarios overview. With one or more scenarios selected, you pick a composite landscape assigned to the agent and are taken to the Landscape Overview filtered for the selected scenarios.

[Integration Suite] Added API Management access credentials (URL, client id, client secret) to Integration Suite CPI agents, together with a new API Management Access check in the agent Connection Test. The fields are optional and only needed when API Management features (such as B2B ProtectedAPI) are used (for example, during Subsidiary creation).

[FIX, DevOps, Api Management] Fixed an error when creating a composite API Management landscape with three or more landscape items (the Next step failed with a server error).

[FIX, DevOps, CPI] Fixed the display of the Git pipeline validation report (Git Pipeline Validation Status).

[FIX, Common] Fixed the public API PUT /api/v1/agent that updated only a small subset of agent settings and silently reset all others to their defaults.

[FIX, Change Management, B2B] Fixed slow creation and deletion of B2B business entities (subsidiaries, trading partners, communication partners) that triggered a full synchronization of the whole TPM registry. Only the affected object is now synchronized, reducing the post-processing from minutes to seconds.

[FIX, B2B, PI→CPI Migration] Fixed the B2B Migration Overview failing to load when a migration record referenced a company/subsidiary, agreement, operation mapping or partner profile tracked object that no longer exists (for example a deleted agent, or an object re-created in SAP).

[FIX, B2B, PI→CPI Migration] Fixed Type System Version validation wrongly blocking EANCOM in Agreement creation and PI to CPI B2B migration. Version validation is now suppressed for EANCOM, whose Integration Advisor version groups don’t map to a single standard version.

[FIX, PI→CPI Migration] Fixed an issue when PI to CPI migration failed for integrations where PI defined sender agreements with * wildcards.

[Infrastructure, Security] Added support for Microsoft Entra authentication to Azure Database for PostgreSQL flexible server. Figaf Tool can now log in with a Microsoft Entra access token instead of a database password, so no database credential has to be stored in the deployment anymore - access is granted to an Azure identity (user-assigned or system-assigned managed identity, AKS workload identity or service principal) and revoked centrally in Entra ID. The mode is optional and off by default, so existing password-based deployments and other database systems aren’t affected. See the section for the configuration steps.

[FIX, DevOps, Integration Suite] Fixed an issue when the Set Transport Configuration as 'Default Values' for Edge runtime option (composite landscape configuration) broke IFlows with a scheduler. Externalized scheduler parameters (type custom:schedule) are now excluded from the default values replacement, and the replacement validation is skipped for IFlow configuration only transports.

[FIX, Change Management, B2B] Fixed an issue when synchronization of integration objects failed for CPI agents with TPM if a B2B scenario had a party identifier (initiator/reactor sender or receiver ID) longer than 36 characters.

[DevOps, Integration Suite] Added a Set Transport Configuration as 'Default Values' for Edge runtime option to the composite landscape configuration. It works around the limitation that an Edge Integration Cell runtime configuration can’t be read or written programmatically: during transport the configured values of affected IFlows are written as default parameter values so the configuration can still be delivered to the target. The behavior applies per IFlow — only IFlows whose runtime profile resolves to an Edge Integration Cell runtime on the target are affected, while IFlows running on Cloud Integration keep the normal separation of default and configured values.

[AI, Security, CPI] Added the ability to connect Claude.ai (and other MCP clients) to Figaf as a custom connector using OAuth 2.1 Authorization Code with PKCE, so the AI client can call Figaf’s MCP tools. Login reuses your existing Figaf authentication (local users and SAP BTP); connecting requires the IRTMcpReader (or admin) role and access is read-only. See the section for more details.

[AI, CPI] Added a Preview Matched Objects action to the AI IFlow documentation scope filters, so you can review the exact packages and IFlows matched by your package/IFlow regex filters (with validation of invalid regex) before running a documentation batch.

[Change Management, CPI] Enhanced synchronization to recognize and persist discovery (standard) content. Design artifacts belonging to Configure-only discovery packages are now flagged as standard content on the tracked object, so they can be identified across all synchronization flows.

[DevOps, B2B] Added an Allow B2B transports of Draft state option to the composite landscape configuration (off by default). When enabled, agreements, agreement templates and B2B scenarios in Draft state can be added to and transported through DevOps. Drafts of Message Implementation Guidelines and Mapping Guidelines are always blocked.

[DevOps, B2B] Enhanced the landscape configuration for TPM with a Customize TPM import settings option that configures agreement import selections similar to SAP’s Action Import Agreement screen. DevOps then applies these import options when importing the TPM agreement.

[DevOps, CPI] Added support for transporting SAP standard content (from Discover) through DevOps tickets. New standard content is created as a copy from Discover and existing content is matched, keeping standard packages' unmodified status through the transport chain (including via Virtual agents). If the source has a pending Discover update or source and target versions differ, the transport is blocked. Works with composite landscapes and supports a single object, a package, or a package with all dependent objects.

[DevOps, CPI] Added a parameter mapping rule for discovery content technical names so Discovery Content packages can be mapped. The suffix is applied via SAP’s Discover copy API against the original catalog package, keeping copied packages and artifacts consistently named across the landscape.

[PI→CPI Migration, B2B] Added a Delete Records function to the PI to CPI migration overview. It removes the migration record from Figaf. Nothing is deleted in SAP and the action is restricted to the Admin role.

[B2B] Added support for SAP Integration Suite agreement versioning. Synchronization detects changes in older agreement versions, not only the latest.

[B2B] Enhanced B2B Scenario tracked object to store more information about MAG.

[B2B] Added certificate status to the Company, Subsidiaries, Trading Partner and Communication Partner tracked objects. For entities with multiple certificates the worst status wins, and N/A is shown when there are no certificates.

[B2B] Enhanced the Create Agreement function to pick which MAG version to use.

[Common, CPI] Added new agent connection tests for B2B access (Agreement Templates, MAGs and Interchanges - for Integration Suite agents with B2B enabled) and Partner Directory access (for all CPI agents).

[FIX, DevOps, B2B] Fixed B2B transport so that outbound Functional Acknowledgement channels assigned to a Trading/Communication Partner communication are now remapped correctly. Previously such partner-specific acknowledgement channels were only matched against Company/Subsidiary communications, resulting in a wrong source reference.

[FIX, B2B] Fixed an issue when B2B agreements deleted via Figaf while still active left stale state at SAP, so an identical agreement could not be re-created afterwards. Agreement deletion now blocks if any selected agreement is still active and asks you to deactivate it first.

[FIX, DevOps, CPI] Fixed a false validation error in DevOps transports where credentials referenced through parametrized values (Camel Simple expressions) were incorrectly reported as missing on the target system. Such dynamic references are now skipped during the credential existence validation, while static references are still validated.

[FIX, API Hub] Fixed broken integration with API Hub agents.

[Common, CPI] Optimized Custom IdP authentication (Sign on to SAP CPI CF/IS using SAML2) to no longer send a request to saml.figaf.com during login.

[Testing Tool, Integration Suite] Improved externalized parameters upload for the test (Figaf/Mock) IFlow to avoid upload of the SAP_ProfileId parameter when there is only one configured runtime.

[FIX, Testing Tool, CPI] Fixed an issue when the test (Figaf/Mock) IFlow missed configured values of externalized parameters in the source IFlow (only default values were used in the test IFlow).

[FIX, Testing Tool, CPI] Fixed an issue when the test (Figaf/Mock) IFlow could contain duplicated senders. Each sender now gets a unique participant name (Sender, Sender1, …​) during test IFlow generation.

[FIX, PI→CPI Migration] Fixed an issue when PI to CPI migration failed for integrations where PI defined interface determinations or receiver agreements with * wildcards.

[FIX, B2B] Fixed links from Figaf Tool to the SAP TPM Agreement that stopped working due to versioning function for TPM agreements.

[PI→CPI Migration] Added a possibility to override the default FigafMigration script collection used during PI to CPI migration via the irt.config.pi-to-cpi-migration-script-collection-technical-name application property (go to Application properties for more information). It allows using a custom script collection to deliver faster updates of migration scripts.

[FIX, B2B] Fixed an issue when B2B Scenarios using a custom main flow weren’t displayed in the B2B Scenario overview and weren’t available for selection in the Create Agreement function, although they were shown in Tracked Objects.

[AI, Change Management, CPI] Added AI-generated documentation for IFlows. When Enable IFlow Documentation is configured for a CPI agent, the documentation is generated asynchronously during synchronization and can also be generated/regenerated on demand on the IFlow object page.

[AI, CPI] Added Figaf AI assistant that allows interacting with the tool using natural language to search IFlows (by name, package, last change date, sender/receiver systems), discover IFlow dependencies and compare IFlow versions. It’s available as an in-app AI Assistant chat.

[B2B] Added presets (pre-defined table views) to the B2B Scenario overview that define which columns are visible.

[B2B] Added Sender Type System, Sender Type System Version, Receiver Type System and Receiver Type System Version columns to the B2B Scenarios and CSV report.

[B2B] Enhanced Create Agreement function to copy existing custom IFlows into new partner-specific IFlows. For each custom flow slot (Main, Pre, Post) a mode can be selected: Use Template Assignment, Reuse / replace existing or Copy into new.

[DevOps] Enhanced error message shown when an object transport is denied to include the reason (denying rule) of denying.

[DevOps, CPI] Enhanced transport of IFlow configuration that has externalized scheduler parameters (type custom:schedule). A transport validation now warns that such configuration may not be applied correctly by SAP and should be reviewed and updated manually afterwards.

[FIX, PI→CPI Migration, B2B] Fixed an issue when agreements created via agreement creation or PI to CPI migration couldn’t be activated because Initiator and Reactor roles were determined incorrectly. The B2B Scenario direction is now determined correctly for both agreement creation and PI to CPI migration.

[FIX, Testing Tool] Fixed an issue when the Partner field of a test case was initialized with empty values during test case creation from a recording request with {{OUT}} directive.

[FIX, Common] Fixed the confirmation dialog of Modify Object Licenses to show the correct message (The following objects will be updated in the license) and list only the changed objects and license types instead of all licensed objects.

[FIX, CPI] Fixed Custom IDP integration after changes on SAP side (it stopped working on some tenants from 2026-05-28). If some Agent system is not updated yet and requires old approach, it’s possible to fallback by defining Login Url on agent manually in the following format: <authorization-url>/saml/discovery?returnIDParam=idp&entityID=<authorization-url>&idp=<idp name from agent>&isPassive=true where:

[Integration Suite] Added Application id parameter on Agent page for Integration Suite agents with Custom IdP. It’s used to work around the authentication problem when Integration Suite forcibly chooses IAS authentication (authorization redirect URL is not available in the initial authentication requirement response in such case).

[FIX, PI→CPI Migration, B2B] Fixed several UI issues related to B2B migration profile.

[Change Management, Integration Suite] Enhanced deployment of non-IFlow artifacts (Value Mappings, Script Collections, Message Mappings, Function Libraries, Imported Archives) on Landscape Overview page. Non-IFlow artifacts are now deployed only to runtimes resolved from their linked parent IFlows by default.

[Change Management, Api Management] Enhanced changes detection for API Proxy synchronization.

[B2B] Enhanced Agreement Template tracked object to include version. AT versions are now properly synchronized and stored. Draft Agreement Templates are denied for transport creation.

[B2B] Enhanced B2B Scenario data to be stored in the database and initialized during synchronization (including IFlow runtime status/version, MIG/MAG status), enabling backend filtering and sorting for these columns.

[B2B] Enhanced B2B Scenario overview with renamed and additional columns for MIGs/MAGs: Sender/Receiver MIG Newest Design Status, MAG Newest Design Status, Sender/Receiver MIG Newest Design Version, MAG Newest Design Version, Sender/Receiver MIG Assigned Version and MAG Assigned Version.

[B2B] Added Agreement Template version column to B2B Scenario overview (visible when Show additional columns is enabled).

[B2B] Improved version chain handling for Agreement Templates, MIGs, and MAGs. When the latest version is deleted, the previous still-active version is now used and considered as actual.

[B2B, PI→CPI Migration] Enhanced B2B Create/Migrate Agreement function to only list Agreement Templates that are active or latest draft, with version number displayed.

[B2B, PI→CPI Migration] Enhanced agreement creation to support selection of Communication Partner. If Communication Partner is selected, Agreement Template list is filtered accordingly.

[B2B, PI→CPI Migration] Added support for Customer_TS_IDOC TypeSystem, treated as equivalent to SAP_IDoc during agreement creation and PI to CPI migration.

[PI→CPI Migration] Updated migration templates for communication channels with Cloud Connector and Runtime Profile support. Added Location ID configuration, Enable Cloud Connector option for channel mapping templates, and Runtime Profile selection on migration page.

[Support Tool] Added minimum validation for Alerts lifetime period (days) configuration to prevent defining the value less than 3 days.

[Common] Removed Figaf Gradle plugins declaration from generated git repositories.

[FIX, Testing Tool] Fixed an issue when additional outbound message with PAYLOAD_SNAPSHOT state was polled during recording or polling test results when Trading Partner Management V2 package was used.

[FIX, Testing Tool] Fixed an issue when encoding of special characters (e.g. Ö) failed when sending test messages to SOAP or IDoc adapter based flows.

[FIX, Testing Tool, B2B] Fixed an issue when B2B testing failed if B2B Package for test case running was configured to B2B Integration Factory - Cloud Integration - Trading Partner Management. Enhanced dynamic endpoint determination for both Trading Partner Management V2 and B2B Integration Factory packages.

[FIX, DevOps, B2B] Fixed an issue when transport was marked as successfully imported although archive build failed with error while fetching MIG.

[Infrastructure] Migrated the project to Java 21 (LTS). If you use Docker distribution: standard or BTP, the tool is updated automatically. If you use on-premise standalone instance, please update to Java 21 runtime before running newer version because Java 17 runtime isn’t supported anymore (steps for update are described here).

[B2B] Added support of agreement creation.

[B2B] Supported filtering during synchronization of B2B objects. This filter-based synchronization is executed:

[B2B] Added archiving settings to B2B Scenario table and CSV report.

[B2B] Added version and status of MIGs/MAGs related to B2B Scenario to the table and CSV report.

[B2B] Added runtime status, runtime version and design version of IFlows related to B2B Scenario to the table and CSV report.

[PI→CPI Migration, B2B] Enhanced Type System and Type System Version definition and added validations related to selected Partner Profile and B2B Scenario.

[Testing Tool, CPI] Supported polling of all MPLs when amount of dependent messages is more than 1000.

[DevOps] Changed denying rules criterias to use OR condition instead of exclusive one.

[DevOps, CPI] Added an option on landscape level (Use 'Default Value' of Externalized Parameters instead of 'Configured Value') to change IFlow Externalized Parameters values used in transport configuration. IFlow Externalized Parameters have 'Default Value' and 'Configured Value'. When this option is enabled and the parameter has 'Inherit from source' mode, the 'Default Value' will be used.

[Change Management, Integration Suite] Supported linking between B2B Scenario and IFlow if IFlow URL is configured via externalized parameters.

[FIX, Testing Tool] Fixed an issue when X12 message type wasn’t detected properly for documents having BIG segment with 2 elements.

[FIX, Testing Tool] Fixed an issue when file type and encoding weren’t recalculated in the Message and Test Run Result messages.

[FIX, DevOps] Fixed an issue when only one transport validation tag was added into the warning message for transport items.

[FIX, B2B] Fixed an issue when agreement wasn’t updated in Integration Suite if B2B Scenario name was changed.

[FIX, Common] Fixed http client reset to reset client related to MIGs/MAGs synchronization.

[FIX, Change Management] Fixed an issue when synchronization results were leaked in Hazelcast cache when object type synchronization failed.

[Testing Tool, CPI] Supported change of Agent Object assigned to the test case for IFlow Chains.

[Change Management, CPI] Added a possibility to deploy Value mappings, Script collections, Imported Archives, Function libraries, and Message mappings and their dependent artifacts on Landscape Overview page.

[Change Management, CPI] Added a possibility to undeploy Value mappings, Script collections, Imported Archives, Function libraries, and Message mappings on Landscape Overview page. The objects can be undeployed only if related parent objects (e.g. IFlows) are undeployed in the same request as well.

[DevOps, B2B] Enhanced Auto-activate B2B agreements to activate not activated agreements and update edited agreements as well.

[DevOps, B2B] Added new Suppress warnings for Auxiliary B2B objects - allow imports always option on Landscape configuration page.

[DevOps, B2B] Implemented forcible transport option (with overwriting versions when it’s possible) for MIGs/MAGs. It works the following way: Figaf tool performs transport and if MIG/MAG isn’t imported successfully due to warning Can be imported - this will overwrite the existing object with potential loss of data, the user can suppress this warning and perform forcible import.

[DevOps, CPI] Implemented synchronization of previous system in addition to the dev and target systems during initial synchronization of import through landscape with Locked version workflow.

[B2B] Supported deletion of agreements.

[B2B] Supported deletion of trading partners and communication partners.

[FIX, Change Management, CPI] Fixed an issue when script wasn’t run successfully in Groovy IDE if the script produced more than 86 headers.

[DevOps, B2B] Supported import of parameters of Trading Partners, Company, Subsidiaries and B2B Scenarios.

[Common] Added bootstrap parameters irt.config.agent.skip-pi-user-access-api-availability-test and irt.config.agent.skip-pi-user-access-test to make the user API test optional for BTP deployment (go to Application properties for more information).

[FIX, Change Management, CPI] Fixed an issue when scenario documentation was not generated for IFlow having orphan step element.

[FIX, DevOps] Fixed an issue when ticket couldn’t be moved to next or previous stage if newer version of attached object was deleted.

[FIX, PI→CPI Migration, B2B] Fixed an issue when agreement update didn’t work during migration.

[Testing Tool, CPI] Supported configuration of Request Method for HTTP adapter in Send Message Requests.

[Change Management, CPI, CPIHelper] Supported debugging through CPIHelper. To enable it configure External IDE URL to <Figaf tool instanse>/#/groovy-ide/deeplink/ in the related configuration of CPIHelper.

[Change Management, CPI] Enhanced accuracy in groovy scripts and implemented a possibility to configure Capability for Figaf Bot. Capability is configured differently for the objects:

[Change Management, B2B] Implemented restoring of TPM objects when they marked 'deleted' due to empty api responses from Integration Suite.

[Change Management, B2B] Enhanced MIGs synchronization to group objects if even some error occurred during synchronization (e.g. connection issue).

[Change Management, CPI] Enhanced IFlow BPMN Context search based on AI embeddings splitting vector values to adapters and steps related to MessageFlows.

[DevOps] Added support of mass resolve/cancel of multiple selected tickets on Tickets page.

[DevOps, B2B] Enhanced agreements transport to consider SystemType in addition to Purpose.

[DevOps, B2B] Added new Auto-activate B2B agreements option on Landscape configuration page.

[DevOps, B2B] Added new Attach all dependent objects for B2B transports option on Landscape configuration page.

[DevOps, B2B] Enhanced validations for B2B TPM transport through landscape with Locked version workflow.

[B2B] Extended PI to CPI migration configuration to enable automatic deployment of IFlow (Deploy MainFlow immediately after migration option) and activation of agreement (Activate TPM Agreement immediately after migration option).

[FIX, Change Management, B2B] Fixed an issue when tracked Object for Agreement Template was not updated new scenarios were created under the Agreement Template on Integration Suite.

[FIX, DevOps, CPI] Fixed an issue when rollback couldn’t be performed when transport had not the latest version of MIGs/MAGs.

[FIX, DevOps, B2B] Fixed an issue when only the latest version of MIGs/MAGs were attached to copied ticket.